Ghostgrid™—Strength Without a Coating

In ultralight furniture, the problem of a seat carrying a person’s weight has generally been solved with coated woven fabric. Where mesh has been put under load, the answers have been to make it heavier, or to blend in a thermoplastic fiber that bonds the structure.

Ghostgrid™ is reinforced by a grid built directly into the weave.

Ghostgrid mesh close-up on a Helinox chair
A material with a long, quiet history

Ghostgrid™ is a precision monofilament mesh, a class of textile produced for decades for filtration and screen printing, and more recently for tent screens and bug netting, places that ask almost nothing of it structurally. A single smooth strand has far less friction against the strands around it than a spun or multifilament yarn does, which is why lightweight monofilament mesh has stayed in low-load applications. Even now, the lightest grades sold into the outdoor industry carry supplier cautions against load-bearing use.

Making that same mesh strong enough to carry the weight of a person, with no coating and nothing bonding it together, is the engineering.

Helinox chair with Ghostgrid mesh on open ground Camp table set with binoculars, mug and fruit Packing down a Helinox chair outdoors
What coating actually does

Put sustained weight on a woven structure, and the yarns migrate where they cross. The weave opens, thin spots form, and the material fails right there, long before its rated tensile strength matters. Coating locks those crossings in place, which is why makers of coated ultralight seat fabrics describe their coatings as improving tear strength, not only as weatherproofing. But a coating is more than a finish. It does structural work, and it comes with two trade-offs: the weight of the coating itself, and the drying and curing step.

A mesh has no room for a coating. Coat an open weave and the coating bridges the openings,
so it stops being a mesh.

Seven, then one

Ghostgrid™ solves this with a substitution.

The base is a polyester monofilament, 0.18 mm, solution-dyed black. Every eighth strand, in both directions of the weave, is replaced with a 400D UHMWPE yarn, ultra-high molecular-weight polyethylene, the fiber specified where tensile strength per unit of weight matters. Seven monofilaments, then one UHMWPE.
Then seven again.

Run that pattern in both directions, and it forms a reinforcing grid on a 3 mm pitch, designed to spread load across the structure and help resist tear propagation. Where a coating would hold every crossing chemically, the grid constrains the geometry mechanically, at a fixed interval.

Ghostgrid mesh seat against open sky
Knowing where the line is

Ultralight design isn’t about making something indestructible. It’s about establishing how much strength the application actually demands, removing everything above that line, and being right about where that line sits. Here, it’s 7:1 and 3 mm.

For a seat, that line comes from one person’s weight, held in one spot, for hours. A load like that depends more on how well the mesh resists tearing than on how hard it can be pulled before it breaks. So the lengthwise (warp) tensile strength of Ghostgrid™ mesh came down slightly while tear resistance went up, a deliberate trade.

A Cleaner Process

Ghostgrid™ makes no recycled-content or bio-based claim. Its environmental case is in what the material stopped needing: no dye bath (color goes in at extrusion), no coating, and no drying or curing behind it. At 79 g/m² against the previous 99 g/m², that’s 20% less material to begin with.

You’ll find Ghostgrid™ in Helinox’s LT Series.

Ghostgrid™ is a trademark of Helinox.

Ghostgrid in use - 1 Ghostgrid in use - 2 Ghostgrid in use - 3 Ghostgrid in use - 4 Ghostgrid in use - 5 Ghostgrid in use - 6 Ghostgrid in use - 7 Ghostgrid in use - 8 Ghostgrid in use - 9
Helinox chair held up by its frame

Other Articles